A Morning in Portage la Prairie

I am normally a "lone wolf" railfan. I find my time to railfan when I can so it's difficult for me to arrange to meet up with anyone else to see trains, plus when I'm alone I get to decide where to go! So when Thomas Sajnovic messaged me to ask if I was available, I hesitated for a moment and decided "what the heck!" Tom was in town doing some training with CN and we arranged to go out on Sunday, May 3rd. I picked him up at 6 AM and we headed over to the CP yard to start.

The usual collection of old Geeps were by the shops.

CP 8231 and company in Winnipeg

CP 8231 and several other GP9s are for sale, "as is where is".

We stood and watched for a few minutes. I spotted a BNSF unit over by the now-closed Rugby Tower. I took this poor shot and then we hopped in the car to try to get a better angle. Of course, by the time we drove around, two CP locomotives had hooked onto it and were pushing it into the shop area as I tried to stop to photograph it. No picture for you!

BNSF 8235 in Winnipeg

We consoled ourselves with photographing a pair of switchers in the nice sunrise light.

Big stacks on those locomotives!

After that, we headed over to the Prairie Dog Central to get a couple of shots before proceeding to Portage la Prairie.

The PDC had all three of its diesels out.

The Prairie Dog Central fleet

BNSF 1685 is the last Burlington Northern Manitoba Limited locomotive (ex BNML 2). It was donated to the PDC in July 2010. The green loco is 4138 which has been with the PDC for quite a while. The new arrival is 5232, the striped locomotive on the right.

Ex CN, ex CCGX 5232

Long time readers of the blog will recognize this as ex CCGX 5232, which worked for the Central Manitoba Railway (CEMR) for several years. I first spotted 5232 in September 2009 when she was still lettered as ANY 5232, ex Athabasca Northern. I've written about 5232 many times.

A volunteer who was around at this early hour told me that 5232 was acquired to work on the PDC's car storage business. This six axle power will pull a lot more than the Geeps!

The volunteer - sorry, I can't recall his name - invited us to have a look at #3, the PDC's steam engine. It was still warm from a run the previous night.

Being in the shade, it was a little difficult to photograph. I did the best I could.

A couple of CP westbound trains rolled by while we were chatting. 

Once we were done at the PDC, we hit the road for Meadows and beyond. I had to pause briefly at Meadows to shoot yet another photo of the grain elevator...

Then we carried on to Marquette - no grain elevator there any more, of course - and on toward Portage la Prairie. While traveling the back roads near Poplar Point, I spotted this grain elevator at a (Mennonite?) colony.

I spotted this nice barn near there too.

Anyway, we finally made it to Portage la Prairie. Tom spotted a rail grinder moving on the CP tracks, so we made our way over there and found LIMX 3411 tying up.

Sadly LIMX 3411 derailmed in Portage the day after we saw it.

While admiring this magnificent piece of equipment, I spotted movement on the CP... and I spotted yellow UP engines! We sprinted for the tracks to capture UP 3556 and UP 3645 leading CP 9562 and a grain train.

While we were admiring that train, Tom spotted movement on the CN side, so over we went! This was CN 2679 leading an intermodal train east.

CN 8877 was about 3/4 of the train back, providing DPU power.

That's the best part of railfanning Portage - action on both tracks!

That train finished going past us at 09:02. We decided to go see the CP station. After we arrived there, we spotted a westbound train on the CN at 09:15. CN 2200 led 8838 and 8901 past the station.

The station is looking good! A big shout out to everyone working to restore the station.

I like the ex Manitoba Hydro locomotive.

I'm guessing it was nicknamed "Snoopy".

CP 3111 was the resident switcher in the CP yard.

After those three trains in Portage, there was a lull. We decided to head back to Winnipeg via the Trans-Canada, which meant there was a potential for CN action... and there was! To be continued...

Other Portage la Prairie posts

Diamond Is My Best Friend

I was out on Friday September 16 during the day, spending some time with my son. We headed up to Assiniboine Park to play at the new Nature Playground. It's a very cool place.

On the way we stopped at Wilkes Avenue to see if there was any CN action. Nothing seemed to be happening, so I drove west out to Diamond. There I found the above train on the CP Glenboro subdivision waiting to go south across the CN Rivers subdivision. It had CP 6029 and CP 5920 with a long string of grain hoppers.

Why was it waiting? Well, after I shot the CP photos I saw a headlight to the west. It turned out to be a CN freight headed by CN 2241.

The second unit was CN 2240. 2241, 2240... if they had a third unit it would have to have been CN 2239.

CN 2241 East was not going very fast, so we gave chase. I passed it just east of the Perimeter and shot it again.

By this time my son was getting tired of the trains, so we headed off to the Nature Park for some running around.

On our way back, I ducked out on Wilkes Avenue again and I saw the CEMR freight train was parked at the end of their Carman subdivision. CEMR 4000 was the lead unit but the real surprise was the second unit, SD40 CEMR 5396. That unit has been for sale for almost two years!.


Oh yes, I forgot to mention that the Loram ballast cleaner was parked just west of the Perimeter on the little stub siding there. The covers were off the side of the power unit and a few workers were servicing it.



There was lots of stuff around to see!

Loram Ballast Cleaner in Winnipeg

I was driving on the Sterling Lyon Parkway here in Winnipeg on Wednesday afternoon, passing the future site of our IKEA, when I saw an odd contraption parked on the nearby stub track. It turned out to be a Loram ballast cleaner.

What does a ballast cleaner do? Well, Loram is glad you asked. It basically scoops up all the ballast from the ends of the ties outward, cleans it, and puts it back. It takes all the mud, clay, etc. that accumulates in the ballast and shoots it away well clear of the track. This mean looking contraption is what scoops up the ballast.

From here, the ballast goes by conveyor to the next piece, where it is cleaned and put back beside the track in the profile specified by the railway. You have to have the right slope to allow proper drainage. I think the back end of the contraption below (left of photo) swings out to discharge the "fines" aka dirt and clay. Note the spare brushes on top. They also brush the ends of the ties to get the loose ballast off them.


Next comes a tank car. I assume this is for fuel. On Loram grinders they carry their own water for fire-fighting, but I can't see how a ballast cleaner can cause fires. Maybe I'm missing something.

Finally, a caboose. You can see that caboose SBC-9 has been modified fairly extensively.


There are several videos of these babies on YouTube.




They sure make a lot of dust!

Winnipeg Railfanning, Part 1

Head on view of CP 1597

I hope everyone had a good holiday! For those who celebrate Christmas, I hope Santa was generous. I found a model train car under the tree to help build my fleet.

On Boxing Day I set out to do a few hours of railfanning around the Winnipeg area. I took my mother and sister to the airport then went to the CP yards downtown to see what power was around. At the CP Weston shops at 08:50 I saw the following units: 5707, 3117, 9153, 5998, 5940, 8778, 8815, 5988, 3119, 6055, 9760, 8521 and CEFX 117. There was a container train shunting in front of the yard so I couldn't get any decent pictures.

I went to the Arlington Street bridge and took some shots from there. CP 1597, 1506 were shunting, as were CP 6065 and 1622.


At the fuel stands I saw CP 1562, 1532, 6616, 6609 and several other units. It was a little cold standing on that bridge!

I went to the east end of the yard and found CEFX 1041 and CP 9511 shut down at the end of a train at 09:35. CP 8726 was heading up another train there.

CEFX 1041 and CP 9511

From there I took a quick look at the Greater Winnipeg Water District (GWWD) railway yard and saw GWWD 201 shut down, with the hulks of CP 8016 and 8018 nearby.

On to CN's Symington hump yard, where I found hump set CN 7511, 501, 504, 7528 (two GP38s with two slugs in the middle) and another set working the hump at 10:15.

Two Geeps, two slugs

There were two sets of power at the intermodal terminal, one led by CN 2531 and 5360, and the other by weathered CN 5367.

I noticed a few odd cars at the foot of the hump. One was GO Transit car 2647, and the other was a Loram unit LMIX 601. There were also a few pressure vessels on flatcars behind the Loram unit. I guess they were on the "do not hump" line.

GO Transit 2647 in Winnipeg

LMIX 601 in Winnipeg

I heard CN train 840 get permission to leave the yard, and I quickly deduced they were heading east toward the Perimeter Highway, so I went down by CN Navin and parked by the Tinkertown amusement park. Great place to take the kids, by the way. As is typical on the Prairies, I saw the train long before it was close enough to take pictures.

CN 840 arriving in Winnipeg

CN 2531 and 5360 rolled by at 10:39 with a long grain train.



From there, I moved to the CN main line along Wilkes Avenue, but that will wait until my next post.

UPDATE: Someone asked on the CanPassRail mailing list why GO 2647 was in Winnipeg. The answer: "A friend of mine from the CN has come up w/ the answer, & even more. Go Transit is receiving new Bi Levels from Bombardier in Thunder Bay. They are being taken to Winnipeg Symington Yard. 2647, & 2648 are going out on Train #302 tonight (Symington-MacMillian Yard). 2646 Is Currently at Mac yard, 2645 Arr. Mac Yard Dec 23, 2644 arr. Mac Yard Dec 14, Arr Mimico Dec 17, 2642, 2643 Not on the CN System as of yet. I'm sure in the next few weeks prob more GO Coaches will be arriving at Symington Yard."

Read next post in series