Tuesday, July 14, 2015

Northwest Manitoba Elevator Trip - The Promised Land

This is part 3 of my northwest Manitoba grain elevator trip. To start at the beginning, go here.

This post will cover the section of my trip from Dauphin to Inglis, on June 27, 2015.

I arrived in Dauphin at about 8:15 AM. Driving downtown toward the train station, I noticed CN 853 was just leaving the town... very slowly.

The station is quite impressive! Back to that soon.

I drove over to the sole remaining grain elevator in Dauphin, a Cargill concrete grain terminal.
I think CN 853 must have lifted a few cars from here as it had more grain cars on it than when I saw it in McCreary and Makinak.


I returned to the Dauphin train station to take a few photos. The sun was dodging between clouds so I had to wait for the right opportunity... that's the story of most of the day, really.

It's quite an impressive station. It was built by the Canadian Northern Railway in 1912 and is now a heritage building. There are a few different businesses and organizations in the station, including a railway museum. Unfortunately it was too early to be open when I was there.

Caboose CN 79727 is located beside the station.

I hit the road west toward my major destination, Inglis. On the way I stopped at two elevators. The first was at Gilbert Plains.

Gilbert Plains


The elevator is lettered for "Federowich Farms". I have no idea if the elevator sees rail service or is in use at all.

Dutton

A few miles down the line, we find the Parrish and Heimbecker elevator at Dutton. This elevator is in active service and is often worked by CN 853/852. Since I arrived ahead of 853, I didn't see it doing its thing. I was on a schedule - no time to wait around!

These cows were unimpressed by my presence.

The Dutton elevator has a LOT of bins. It has a total capacity of 16,500 tonnes which is quite large compared to Gilbert Plains, for example, which has a capacity of around 4,500 tonnes. This large capacity allows it to survive in the era of concrete terminals.

I arrived at the town of Roblin before heading south toward Inglis. Roblin has a train station that is now the home of The Starving Artist, a cafe/bistro/art gallery. I looked inside for a couple of minutes and it looks very neat!

Inglis


For those who don't know, Inglis hosts the only intact elevator row in Canada. Warner, Alberta used to be the other one until the demolition of two of its elevators last fall. Fortunately Inglis is a National Historic Site so it is protected from demolition. I've always wanted to visit Inglis and this day I did.

Inglis was at the end of the CP Russell subdivision, which extended 23.9 miles from Binscarth to Inglis. Originally the subdivision only reached to Russell but it was extended to Inglis in 1922. Grain shipments continued for 73 years until July 1995, and a notice of discontinuance was issued on March 31, 1996 for the entire subdivision.

The site features five elevators, left to right in the photo below:

  1. UGG
  2. National
  3. Reliance
  4. Reliance
  5. N.M. Paterson


The UGG (United Grain Growers) elevator seen at left was built in 1925 to replace the original that burned down. Note its balloon-type annex at right and the extended driveway protruding from the left.


Next up is the National grain elevator, built by the Northern Elevator Company sometime between 1920 and 1922. It became part of National in 1940 and still bears the National logo.

The elevator was purchased by Cargill in 1974 but was acquired by N.M. Paterson who operated it until its closure.

The original 1930s office is still there. The elevator has two annexes, one crib-style (the tall one on the left) and one balloon-style.

There are two Reliance grain elevators in Inglis.



The smaller elevator was built by Matheson-Lindsay in 1922. It was purchased by the Province Elevator Company in 1928, and that company became Reliance in the 1930s. The larger elevator was built in 1941.

Finally, the N.M. Paterson grain elevator completes the quintet of Inglis grain elevators.

The Paterson elevator was built in 1922 and is open to the public for guided tours, along with the first Reliance elevator.

You've probably noted the CN boxcar. This is exhibited to show how grain was originally carried in boxcars prior to the dedicated grain hoppers of today. Note the grain door used to hold the grain in.

So that was Inglis. I highly recommend you explore their web site, and make the time to visit the site in person!

One parting look at Inglis before we head north toward Swan River and beyond.

PS - I have posted some interior photos of the Inglis elevators.

Next post in the series

Saturday, July 11, 2015

Northwest Manitoba Elevator Trip - Winnipeg to Dauphin

After my planning, it was time to go. My alarm went off at 2:15 AM, and after a shower and a couple pieces of toast, I was ready to roll. The weather forecast was still calling for a chance of thunder showers. I fired up my podcasts and hit the road in the pitch dark, 17 minutes ahead of schedule.

Super early!

As I drove around on the Perimeter Highway, I spotted an eastbound CN freight train on the Rivers subdivision passing under the highway. Something made me decide to go photograph it, despite the darkness. I exited and chased it up Wilkes Avenue. As I approached the head end, I saw a bright light coming from the rear of the head end, which was odd. Overtaking it, I saw they had three TEST cars behind the two locomotives. I got ahead of the train and stopped before Shaftesbury Boulevard. I quickly put my "nifty fifty" 50mm f/1.8 lens on the camera (it's the most light-sensitive lens I have, and quite inexpensive) and photographed the train.
Lots 'o' lens flare!

TEST cars behind the power
The trailing car (which was occupied) is CN 15008 and I believe the middle car was CN 15007. The lead boxcar is an "ATGMS TEST CAR".

ATGMS stands for Autonomous Track Geometry Measurement System (not Anti-Tank Guided Missiles like Google suggested) and is a system designed to be added to regular freight trains so railways don't have to run a special train for track testing.

That was exciting. I got back onto the highway and headed up to Headingley and west on the Trans-Canada Highway. The sky started lightening around 4 AM but it was overcast so there was no real sunrise. I bypassed Portage la Prairie and took highway 16 to Gladstone. There was no action on the CP Minnedosa subdivision.

As I approached Gladstone, I spotted a flashing red light just to the right of the highway, meaning the end of a CN train. I exited and went to the grain elevator in Gladstone to find CN train 853 by the elevator. CN 8902 was on the head end.
Blue hour in Gladstone
I'm not sure what they were doing in Gladstone - I heard them rev the engine for a few minutes - but I couldn't sit around, so I carried on to my first target, Glenella.

On the way there, I had to stop to capture the former Waldersee school... I think it was a school, anyway.
Waldersee School?

Glenella

Who knew?
Beyond being the broomball capital of Manitoba, Glenella has a single grain elevator, a former Manitoba Pool elevator.
Manitoba Pool #166
It's a handsome elevator.

The Glenella grain elevator
Note the MPE painted on the side of the ramp.
Manitoba Pool Elevators
Like many Prairie towns, Glenella has a small hotel. I don't know how many people actually stay in these hotels...
Corona hotel and elevator in Glenella
On to McCreary... but first, I spotted this former gas station and had to photograph it. As you can see I was making a point of photographing decaying old buildings en route.
Parkview Petroleum Products - for sale!

McCreary

The town of McCreary has an ex-UGG grain elevator and a preserved train station.
McCreary elevator and train station
The sun was coming in and out so I was trying to time my shots to get some light. It came out to light this side up.
UGG 4ever!

I do like that UGG logo. It's rare to see it in Manitoba.

I took a few photos of the McCreary train station. It was built in 1912 and closed in 1982. I believe the town bought it in 1997. I saw the museum sign but nothing was open and the windows seem to be mostly boarded up.
McCreary's train station
The lighting wasn't good because the elevator was shading the station.

I was just packing up when I spotted a headlight to the southeast. It was CN 853, the same train I saw in Gladstone. I quickly decided on an angle to feature the elevator and station, fired off the necessary test photos to get the exposure right, and took the shot.

After the head end passed, I packed up and waited for them to clear the crossing before heading off to the next destination. I hoped to get them at the highway crossing just north of town, but the crossing lights came on before I got there, so I watched them roll by before carrying on to...

Makinak

I took a few back roads to get to Makinak, the first time I had left pavement on this trip. On previous trips I swear I was mostly on gravel but not this time!

I had just pulled up near the elevator when I heard a train blowing for the town crossing. CN 853 was right behind me, so I sprinted over to get a shot with the elevator.
CN 8902 in Makinak
The approach shot was fine but my shots of the head end passing the elevator were out of focus. :(

At least this turned out.
CN 853 and grain cars in Makinak
There was a large foundation beside the elevator. At the time I thought it might have been a second elevator, but a little research shows it was a building, probably for fertilizer and other products. You often saw auxiliary buildings beside elevators containing all of the flammable stuff.
Foundation
I shot the other side of the elevator and captured a few sun rays.

Like many Prairie towns, Makinak has a lovely church.

After that, it was time to head to Dauphin. I was still on schedule so I had time to divert for this farm elevator I spotted just south of Dauphin. The sun gods smiled on me and lit it up nicely.

Shortly thereafter, I arrived in Dauphin. That's up next!

Thursday, July 09, 2015

Northwest Manitoba Elevator Trip - The Planning

By the end of 2014 I had photographed all of the grain elevators in Manitoba for my Manitoba grain elevator project, except for the western and northwestern parts. I had around 45 elevators left to photograph, and 145 already "in the bag".

I started my planning for my next trip, knowing that I had to drive about 3 hours to see the first new-to-me elevator. At first I was planning for a multi-day trip, similar to my two-day southwest Manitoba trip. I quickly realized that if I was to get all 45 in one trip, it would be a three-day affair and I couldn't spare the time.

Then insanity struck. What if I took a day trip in June... with the long days... and shot as many as I could while daylight prevailed?

I feverishly planned my route in Excel, as I always do. Using Google Maps I started timing the trips between elevators, punching the numbers into Excel and coming up with a trip plan. I decided on a loop to get all the elevators north of Riding Mountain National Park, which would be almost half of the 45 remaining grain elevators. The trouble was... that would be 21 hours from start to finish. That's a long day. But hey! I'm still youngish so why not?
Insanity by the numbers

I broached my plan to my wife in stages. I figured if I revealed it all at once she would have me committed, so first I negotiated a day to go see some elevators - Saturday, June 27. Then when she asked what time I was leaving at, I muttered, "stupid early" and left it at that for a while. Finally I showed my whole plan to her and she did think I was crazy. At least she hasn't had me committed... yet.

I tweaked the plan over the next few days. One thing bugged me. I really really wanted to get to Inglis to see the last remaining elevator row in Canada, but the site is only open until 6 PM and my plan had me arriving at 5:10... cutting it a bit close. Then I had a brilliant idea... why not do it in reverse? Cut straight west from Dauphin through Gilbert Plains, Dutton and Roblin, then drop down to Inglis in the morning, then complete the loop? Genius.

Here was my map showing the route. Just reverse the arrows west and north of Dauphin and that's the route I settled on.
The big loop

(In case you're wondering, I had to get back to Winnipeg for Sunday morning for a birthday party, so there was no chance of making this a two-day affair)

The weather forecast for the 27th was... iffy. It was calling for sun but a 60% chance of showers or thunder showers. I elected to go, but would check the weather when I woke up early in the morning.

I gathered all my gear (camera, lenses, tripod, monopod, bug spray, sun screen, snacks, drinks), made sure the car's tank was full, and set my alarm for 2:15 AM and went to bed Friday night with visions of elevators dancing in my head.

On to the trip!

Monday, July 06, 2015

Tracking Trains by Twitter

We live in magical times. Technology has advanced railfanning so much compared to just 10 years ago. The widespread availability of quality digital cameras, email lists, Facebook groups, instant messaging and so forth allow railfans unparalleled access to near real-time images and information. Is a CN business train on the move? You'll find out... in time to go see it.

Now a company is bringing real-time train information to Twitter. Winnipeg-based MORR Transportation Consulting is using Twitter to broadcast when certain railway crossings are blocked in Winnipeg. This provides useful information to drivers planning their route so they can avoid congested railway crossings, which may be blocked for a long time. However, this information is useful for railfans too!

MORR has set up three Twitter accounts to broadcast crossing blockages:

  1. @TrainInfoWPG tracks the Marion-Archibald and Cottonwood-Archibald crossings (CP Emerson subdivision mile 1.55 and ~3.17)
  2. @TrainInfoWPG2 tracks the Shaftesbury-Sterling Lyon crossing (CN Rivers subdivision mile 6.27)
  3. @TrainInfoWPG3 tracks the Bison-Pembina and McGillivray-Pembina crossings (CN Letellier subdivision ~mile 1.5 and ~2.8)
I trust you can see the usefulness of these tweets to railfans. The links above take you to the Twitter accounts, to Google Street Views of the crossings, and to my subdivision pages.

I watch #3 the most because it gives intelligence about when CN 532/533 are moving. If I see a tweet about a crossing of McGillivray, followed by a Bison crossing, I know it's CN 532 heading south to Emerson. However, if there is a McGillivray crossing but no Bison crossing, it's the Fort Garry local.

The original (aka #1) Twitter feed should give similar information for trains heading to Emerson. A Marion crossing followed by a Cottonwood crossing means the train is likely going to keep going all the way down to Emerson.

#2 really only says that there is a train on the Rivers subdivision (a direction would be nice!) but hey, if you're out at Diamond that would be useful information.

Their tweets keep saying "New information coming soon" so hopefully we railfans will get even more information!

UPDATE: As of November 10 2015 all three Twitter accounts have been deleted for unknown reasons.

Friday, July 03, 2015

Wrapping Up Kamloops

This is the sixth and last in a series about a May 2015 visit to Kamloops, British Columbia. Start at the beginning.

After seeing the Rocky Mountaineer off, I returned to downtown Kamloops to see what was going on with CP. At 20:15 I found a crew that apparently had just put their power away.
Too bad I didn't have the focus right. :(

Facing west from the same pedestrian bridge, I saw CP 8904 at the head of a coal train waiting to enter downtown.

Kamloops is a crew change point and they switch crews right beside the pedestrian bridge. Here's 8904 pulling up to the office to swap crews, from ground level this time.

On coal trains, CP seems to run a toaster* in the lead followed by one of the SD30C-ECO units (refurbished SD40-2 units). They then have another toaster as mid train power and one more on the tail end. I saw this combination multiple times during my times in Kamloops.

* toaster = squarish, boring locomotive aka AC4400CW or ES44AC. A derogatory railfan term.

So, to recap: toaster and SD30C (CP 5018) on the head end:

Mid-train toaster (CP 8923) with a little bonus coal on the dynamic brake fan grids, and crewman giving the train a rollby inspection:

Finally, end of train toaster (CP 8915).

I like the SD30Cs but the endless parade of ES44s and AC4400s... I don't understand why some people say CN has no variety in its locomotives!

After they passed, I walked down to the parking lot visible in the distance to shoot a side-on view of the parked locomotives. I was especially interested in CP 5875 with its multimark.

I think I had the camera on my monopod, on a timer, holding it up over the chain-link fence. Better than trespassing!

I shot CP 6250 as well but the angle wasn't as good.

After that, I wandered over to a nearby ice cream shop to top up my energy. As I walked out, I heard the tell-tale thrum of big diesels and ran to the crossing to find CP 8615 pulling up for a crew change.

You can see a piece of the pedestrian bridge that I was standing on for several of these photos. The plexiglass barriers make it a bit challenging to photograph from some angles, but you can jam the lens in between the panels if necessary. I suppose they are there to discourage littering.

By this time (20:45) the light was getting dim. I was using a shutter speed of 1/20s so there is some motion blur. Note that 8615 (with 8754 and 8922) was meeting a westbound freight in the yard.

After the tail end passed, CP 8624 (and 9683) throttled up and rolled on by with its intermodal cargo.

I packed it in for the night after that.

I didn't railfan at all on May 14th - shocker! - and I didn't intend to railfan on May 15th, but while driving to the airport I spotted a pair of CN locomotives switching the fuel facility by YKA (Kamloops airport). I grabbed a couple of quick photos before returning my rental car and boarding.

CN 5268 and 6023 were shuffling tank cars around.

PS - My flight back home was pretty uneventful. As we descended to land in Winnipeg, I photographed the Fort Garry area with my iPhone. You can see the former Manitoba Sugar property on the left, the CN Letellier subdivision across the bottom left of the photo, and Chevrier Boulevard running up through the middle of the photo.

Thanks for reading about my Kamloops adventures! You can start back at the beginning or read all my Kamloops stories.

I'll be posting about my grain elevator adventures in northwest Manitoba soon... stay tuned.

Friday, June 26, 2015

One Last Rocky

This is the fifth in a series. To start at the beginning, read A Tranquille Afternoon.

On May 13th, I went out to shoot the Rocky Mountaineer one more time. I had a particular shot I wanted to get, "somewhere on the north side" between the bridge I had already featured and the CN yard.

First I wanted to shoot the arrival. I thought I might get them before they entered CN track, but I was too late and I found them stopped at the switch to the CN-CP interchange, so I rushed back to the downtown area to get them. I decided to shoot them in the open area just east of the Red Bridge, because I had noted some unusual power on the train...

They had a little helper in third position. CN 5472 was tucked in behind RMRX 8014 and NREX 2903.

Given that this train had come off of CP track, the CN unit must have been added when the train departed Kamloops on its way to Banff. Since the train power on Rocky Mountaineer trains is delivered by a generator car (seen here behind 5472), they don't need locomotives with HEP (Head End Power) generators like VIA does.

I shot this artsy glint photo as they passed by.

There were lots of happy people in the dome!

It was tricky to edit this photo to be able to see into the dome. All of the windows are tinted so it's pretty hard to see in, but through the magic of Lightroom I can "enhance" it... much like CSI! ;)

Anyway, it was time to go set up the shot I wanted. I drove across the Red Bridge and went trackside. I found a church that I thought would look great in the shot. It is the St. Joseph's Church, a "Tk'emlups te Seewepemc Historic Site" according to the sign. Did you know that Kamloops is the English translation of the Shuswap word Tk'emlups, meaning "where the rivers meet?"

The church is located on the reserve and was built in the late 19th century, and is the oldest church in Kamloops.

I walked around and took a few photos while waiting for the train, including this HDR one.

I was there a good 45 minutes before the train finally showed up. The sun was playing hide-and-seek so I didn't really get great light, but you use what you have.



I'd say that was a pretty good location.

I said this was the last post, but I was mistaken. The next post will be the last in the series, featuring CP action in downtown Kamloops.